眼科機器製品情報　ご利用上の注意

Table-1

Slide Mechanism Removed to Reduce Table Top Thickness

The previous sliding table contained the slide mechanism in the underside of the table, by adopting a new slide mechanism design and removing the slide mechanism from the table top, all mechanical parts on the underside of the table are now discreetly enclosed and protected by the backplate. This eliminates any concerns such as patients accidentally touching the mechanical parts or their clothes becoming contaminated with oil.

Ultra-Thin Table Top

The table top is now 40% thinner than the previous model, accommodating all patient heights sufficiently with the increased space below the table top.
It is now more convenient to use a slit lamp for patients with curved backs and children with an eye height of only 540 mm from the seat surface, when used in conjunction with Takagi 700GL, 30GL, 4ZL, and 2ZL Slit Lamps.
The minimum height of the new motorized patient chair CR-750S is 400 mm, 30 mm lower than the previous model.
By combining ST-50 and CR-750S, tall patients can be examined easily by lowering the seat position, without hitting their folded knees to the underside of the table.
The large space below the table top allows patients in wheelchairs to be examined quickly and comfortably.

Sliding Mechanisms

Choice of Automatic and Manual Sliding

Automatic or manual sliding function can be used as required, e.g. simply slide the table out using manual mode then slide back using automatic mode, if the user feels more comfortable doing so due to a patient’s condition.

Swipe Function (Factory Option)

The motorised table slides by swiping the touch sensitive part where the blue light flashes, sensing the direction of the finger movement. Intuitive operation is possible by swiping in and out for the required table direction, achieving ease of use and safety.

Safety

Elevation Safety Switch
The plate section which covers the complete under side of the table is now the touch sensitive elevation safety switch, enhancing safety remarkably. When something touches the plate such as a patient’s legs, the buzzer beeps and the switch panel turns red to alert the operator.

Slide Safety Switch
The slide stop switch on the table top can swiftly halt the sliding motion by either pressing or touching it during the automatic sliding procedure.

Fall Prevention Guard
The table top has a lipped edge guard to prevent instruments falling.

Elevation Switches

Elevation of Table and Motorized Patient Chair
Two LED backlit switches, tactile through three-dimensional modeling, for raising and lowering the table and the connected motorized patient chair. By pushing down with a thumb to lower, and up with a finger to raise, intuitive operation is now achieved as the direction to push the switches and the direction of the table and chair movement are the same.

*Only Optional Takagi motorised patient chairs can be connected to ST-50.

Underfoot Space

Minimum Table Height 620mm
Minimum table height is now 50mm lower than the previous model, comfortably accommodating all patients.

Elevation Stroke 300mm
The 300mm elevation stroke easily accommodating all patients.

Slide Stroke 500mm
The slide stroke is now increased to 500 mm, giving increased underfoot space.

New Design

Minimized Cable Exposure
With safety and aesthetics in mind, a power cable and video camera cable can be stored inside the cable access cover, minimizing external cable exposure.

Storable Space for TV Camera Control Unit
Single TV camera control unit and outlets to supply power to the TV camera control unit are equipped as standard.

*Please contact our sales department for full details on storable camera control units.